Theoretical analysis of β-LaNi5Hx(5≤x≤8): structure and energetics

The calculations of total energy, band structure, and electronic density of states and Mulliken population analysis of β-LaNi5 Hx (5≤x≤8) were performed by adopting the method of total energy based on the density functional theory. The augmented plane wave function was selected as the basis set in combination with ultra-soft pseudo-potential technology. The influence of the amount of H absorbed in alloys was discussed in terms of geometry, electronic structure and thermodynamic derived from calculated results. The results show that the amount of H absorbed and the preferred site occupation of the absorbed hydrogen atoms were controlled by the position of Hbands and the energy gap between H-bands and conduction bands. The β-phase hydrides of LaNi5 are most stable when hydrogen atom capacity coating in the range of 6 - 7.     

Employing fractals and FEM for detailed variation analysis of non-rigid assemblies

Many studies on non-rigid assemblies, or assemblies of non-rigid components, suggest that the component variation affects the assembly dimensional quality. However, little is known about how the variation of surface micro-geometry of assembly components influences the assembly dimensional quality. In this paper, a new method based on the fractal geometry and finite element method (FEM) is proposed to study such an influence. In the new method, a special fractal function, named the Weierstrass–Mandelbrot (W–M) function, is used to extract and represent the characteristics of surface micro-geometry of assembly components. FEM is applied to analyze the deformation of non-rigid assemblies by integrating the variation of component micro-geometry. The sensitivity matrix between the component variation and assembly variation is obtained by using the existing influence coefficients method. It is found that contributions of the surface micro-geometry of assembly components to the final variation of non-rigid assemblies could be substantial under certain conditions. The proposed method is illustrated through a case study on an assembly of two flat sheet metal components under different fixture-releasing conditions.     

几何因素与摩擦耦合对高纯铝箔剪切织构的影响

采用取向分布函数 (ODF)研究了轧制几何因素、轧制摩擦条件对高纯铝箔轧制织构的影响。结果显示 ,如果轧制摩擦因数大 ,当处于均匀变形几何条件 1相似文献   

Tool deflection compensation in peripheral milling of curved geometries

This paper presents compensation of surface error due to cutting force-induced tool deflections in a peripheral milling process. Previous research attempts on this topic deal with error compensation in machining of straight geometries only. This paper is concerned with peripheral milling of variable curvature geometries where the workpiece curvature changes continuously along the path of cut. In the case of curved geometries, both process geometry and the cutting forces have shown to have strong dependence on workpiece curvature and hence variation of surface error along the path of cut. This calls for a different error compensation strategy than the one which is normally used for machining straight geometries. The present work is an attempt to improve accuracy in machining of curved geometries by use of CNC tool path compensation. Mechanistic model for cutting force estimation and cantilever beam model for cutter deflection estimation are used. The results based on machining experiments performed on a variety of geometries show that the dimensional accuracy can be improved significantly in peripheral milling of curved geometries.     

Optimum sweeps of simple polygons with two guards

A polygon P admits a sweep if two mobile guards can detect an unpredictable, moving target inside P  , no matter how fast the target moves. Two guards move on the polygon boundary and are required to always be mutually visible. The objective of this study is to find an optimum sweep such that the sum of the distances travelled by the two guards in the sweep is minimized. We present an O(n²)$O(n^2)$ time and O(n)$O(n)$ space algorithm for optimizing this metric, where n   is the number of vertices of the given polygon. Our result is obtained by reducing this problem to finding a shortest path between two nodes in a graph of size O(n)$O(n)$.     

Comparison of the Effect of a Hydrocarbon Oil and a Terpene Tackifier on the Autohesion of Styrene-Butadiene Rubber

Blends of uncrosslinked styrene-butadiene rubber (SBR) with a terpene tackifier resin or a naphthenic oil have been characterized, and their autohesion and cohesion determined using a T-peel geometry. SBR/oil blends are homogeneous at all proportions, while SBR/resin blends, based on DSC and DMA analysis, undergo bulk phase separation at about 50% resin. However, migration of tackifier to the surface region is proposed at much lower resin contents. Compositions diluted with oil have autohesion similar to the neat SBR. This is attributed to compensating effects; although oil hastens self-bond formation by increasing chain mobility, this is nearly equally balanced by more facile chain separation during bond rupture. In short, oil-diluted compositions are soft and weak. On the other hand, SBR compositions containing small amounts of resin have high autohesion. Resin-diluted specimens deform easily at low strain, just as those containing oil, but intertwined chains of the former have greater resistance to separation, due at least in part to higher glass transition temperatures. It is proposed that autohesion is further enhanced by migration of tackifier to the surface. This causes SBR/resin compositions to be both soft and strong-a necessary condition for high autohesion.     

Relationship between Viscoelastic and Peeling Properties of Model Adhesives. Part 1. Cohesive Fracture

The viscoelastic and peeling properties of polybutadiene/tackifying resin compatible blends have been studied in detail. Viscoelastic properties have been described through the variations of the complex shear modulus, G*(ω), as a function of frequency, ω and peeling properties through the variations of peeling force (F) as a function of peeling rate (V).

After showing the objective character of the peeling curves obtained, the variations of the peeling force and peeling geometry have been studied as a function of volume fraction of the tackifying resin.

In this first paper, the analysis is focused on the first domain of the peeling curves, i.e. the cohesive fracture region. In this region, the peeling properties have been related to the viscoelastic properties in the terminal region of relaxation. It is shown that the longest relaxation time, τ_o, is a reducing parameter of the peeling curves, so a peeling master curve-which is independent of temperature, resin volume fraction and polymer molecular weight-may be defined. Furthermore, the variations of the test geometry as a function of peeling rate have been investigated: the variations of the radius of curvature of the aluminium foil have been analyzed with respect to the viscoelastic behavior of the adhesive, which in fact governs the test geometry.

A detailed analysis of all these features leads to a model which allows one to calculate the peeling curves in the cohesive domain from the adhesive formulation.     

Jet bundle formulation of infinite-dimensional port-Hamiltonian systems using differential operators

We consider infinite-dimensional port-Hamiltonian systems described on jet bundles. Based on a power balance relation we introduce the port-Hamiltonian system representation using differential operators regarding the structural mapping, the dissipation mapping and the input mapping. In contrast to the well-known representation on the basis of the underlying Stokes–Dirac structure our approach is not necessarily based on using energy-variables which leads to a different port-Hamiltonian representation of the analyzed partial differential equations. The presented constructions will be specialized to mechanical systems to which class also the presented examples belong.     

基于几何统计差异性的伪造印鉴识别方法

针对印鉴识别任务中有效印文的提取以及伪造印鉴的识别这两个难点问题,建立在监督分类体系下的印鉴识别系统.利用有效印文与背景的颜色统计差异以及真伪印鉴间的几何统计差异分别解决上述难点.在构建的包含3000个印鉴的印鉴数据库上进行实验,实验结果表明,该方法对于有效印文的提取准确率可达到(95.27±3.73％),对于伪造印鉴的识别准确率可达到97.62％,具有可行性和有效性.